ROBOPAC SISTEMI HELIX 4/2 STRETCH WRAP
Automatic stretch wrapping machine with double rotating arm for very high productivity.
Automatic stretch wrapping machine with double rotating arm to meet the requirements of load stabilisation on pallets, in cases of high hourly output.
The wrapping times are virtually halved with respect to its younger sister Helix 4, thanks to the mirror feature of the machine with a double arm on which the pre-stretch carriages and double film clamping and cutting system are installed.
Al Thika Packaging is an exclusive distributor of Robopac Sistemi in the Middle East. Since 1994 Al Thika has been supplying best automatic horizontal & vertical Stretch Wrapping machines for food & non-food industries in Dubai, Abu Dhabi, Sharjah, Fujairah, Ras Al Khaimah, Ajman, Umm Al Quwain, Al Ain – UAE, Saudi Arabia, Bahrain, Oman and the many other Gulf countries.
Pre-stretch carriage with single motorisation, which allows the stretch film to be pulled at fixed values up to 300% and apply up to 12 containment force values on the pallet.
Carriage with double independent SSC motorisation for continuously varying pre-stretch from control panel 150% to 400% and apply up to 12 containment force values on the load.
Standard pincers clamp with hot wire film cutting
HOT PLATE SEALER
System to obtain perfect sealing of the stretch film
Optional device for clamping, cutting and sealing type Genesis film
Clamp with wrapping film tail insertion
VERTICAL PRESSURE PLATEN
The device can be used with particularly unstable loads
Pallet lifting system located under the conveyor in the machine centre
Device for covering the upper side of the pallet
Device for reducing the width of the wrapping film
VCA4 – CORNER APPLICATOR
Automatic corner applicator device to protect the load
|STANDARD TECHNICAL FEATURES|
|Pallet Dimensions min – max (*)||mm||600×800 – 1000×1350|
|Maximum pallet height||mm||2000|
|Output capacity (* *)||Pallet/h||145|
|Standard pre-stretch carriage||SCSP – single motorisation, fixed pre-stretch, optional kits for different ratios available (manual replacement)|
|Optional pre-stretch carriage||SCSP/2 – double independent SSC motorisation, variable pre-stretch|
|Pre-stretch ratio included||150% – 214% – 257%|
|( *) Possibility of wrapping the half and quarter pallet|
|( * *) In certain wrapping conditions and defined pallet sizes|
|STANDARD ELECTRICAL FEATURES|
|Power supply voltage||V||380 – 400 – 415 ± 5%|
|Power supply frequency||Hz||50 ± 1%|
|STANDARD PNEUMATIC FEATURES|
|Compressed air pressure||Bar||6 ± 1|
|Film reel height||mm||500 (Standard) – 750 (Optional)|
|Max reel diameter||mm||250 (Standard)|
|Reel cardboard height||mm||510 (Standard)|
|Workable film thickness (***)||μm||17 – 30|
|TOP Film thickness||μm||40 – 100|
|(***) According to film quality|