Tinytag Plus Re-Ed Data Loggers for current, voltage, count input monitoring

The Plus Re-Ed range records voltage, current and count inputs and can be connected to a variety of sensors to make specialist data loggers for a wide range of applications. Loggers in the range are used in this way to monitor for example, pressure, wind speed and flow rate, as well as footfall in public buildings such as museums, exhibitions and galleries. Loggers are either supplied uncased (OEM) for building into custom applications, or as a standard data logger in a robust, waterproof case.

Plus Re-Ed TGPR-0700

0 to 2.5/10/25V DC

Voltage data logger, Tinytag, Gemini data logger

Uncased OEM voltage data logger

The TGPR-0700 is a voltage data logger that is supplied uncased so that it can be built into custom applications. It monitors voltages from 0 to 2.5/10/25V and can be connected to a variety of sensors to make specialist data loggers for a wide range of applications, including, for example, pressure or windspeed monitoring.

This logger requires Tinytag Explorer software and a USB cable.

Plus Re-Ed TGPR-0704

0 to 2.5/10/25V DC

Tinytag data logger, data logger, temp data logger

Voltage data logger with input lead

The TGPR-0704 is a voltage data logger supplied in a robust, waterproof case. It monitors voltages from 0 to 2.5/10/25V and can be used to record the output from a variety of industry standard sensors for a wide range of applications, including, for example, pressure and windspeed monitoring.

This unit is supplied with an input lead (CAB-3239). Alternatively, you can buy our 5-pin connector plug (ACS-9703) to connect to your own probe/sensor.

This logger requires Tinytag Explorer software and a USB cable.

Plus Re-Ed TGPR-0800

0 to 20mA DC

Tinytag data logger, current data logger, Plus Re-Ed data logger, TGPR 0800 data logger

Uncased OEM current data logger

The TGPR-0800 is a current data logger that is supplied uncased so that it can be built into custom applications. It monitors the output of a number of industry standard 4 to 20mA sensors to make specialist data loggers for a wide range of applications including pressure and flow rate monitoring.

This logger requires Tinytag Explorer software and a USB cable.

Plus Re-Ed TGPR-0804

0 to 20mA DC

Tinytag data logger, data logger, temp data logger

Current data logger with input lead

The TGPR-0804 is a current input data logger supplied in a robust, waterproof case. It monitors current between 0 to 20mA sensors to make specialist data loggers for a wide range of applications. Typical applications include pressure and flow rate monitoring.

This unit is supplied with an input lead (CAB-3246). Alternatively, you can buy our 2-pin connector plug (ACS-9700) to connect to your own probe/sensor.

This logger requires Tinytag Explorer software and a USB cable

Plus Re-Ed TGPR-1000

0 to 200mV DC

Tinytag data logger, Plus Re-Ed mini volt data logger, Tinytag data logger

Uncased OEM millivolt data logger

The TGPR-1000 is a millivolt data logger supplied uncased so it can be built into custom applications. It monitors voltage from 0 to 200mV and can be connected to a variety of industry standard sensors to make specialist data loggers for a wide range of applications, including, for example, pressure. It can also be used for battery monitoring.

This logger requires Tinytag Explorer software and a USB cable.

Plus Re-Ed TGPR-1001

0 to 200mV DC

Tinytag data logger, data logger, temp data logger

Millivolt input data logger with input lead

The TGPR-1001 is a millivolt input data logger that is supplied in a robust, waterproof case. It monitors voltage from 0 to 200mV and can be connected to a variety of sensors to make specialist data loggers for a wide range of applications, including, for example, pressure. It can also be used for battery monitoring.

This unit is supplied with an input lead (CAB-3246). Alternatively, you can buy our 2-pin connector plug (ACS-9700) to connect to your own probe/sensor.

This logger requires Tinytag Explorer software and a USB cable.

Plus Re-Ed TGPR-1200

0 to 255n

Tinytag data logger, current data logger, Plus Re-Ed data logger, TGPR 0800 data logger

Uncased OEM count input data logger

The TGPR-1200 is a count input data logger that is supplied uncased so that it can be built into custom applications. It records the number of pulses seen during each logging interval, which is user-adjustable from once per second to once every 10 days. Typical applications include flow rate and utility meter monitoring and object/people counting.

This logger requires Tinytag Explorer software and a USB cable.

Plus Re-Ed TGPR-1201

0 to 255n

Tinytag data logger, data logger, temp data logger

Count input data logger with input lead

The TGPR-1201 is a count input data logger that is supplied in a robust, waterproof case. It records the number of pulses seen during each logging interval, which is user-adjustable from once per second to once every 10 days. Typical applications include flow rate and utility meters monitoring and object/people counting.

This unit is supplied with an input lead (CAB-3246). Alternatively, you can buy our 2-pin connector plug (ACS-9700) to connect to your own probe/sensor.

This logger requires Tinytag Explorer software and a USB cable.

TINYTAG DATA LOGGERS – AL THIKA PACKAGING LLC

Al Thika Packaging is the exclusive distributor of Tinytag company in the Middle East. Since 1994 till now Al Thika has been providing Gemini datalogger for robust environmental monitoring solutions for food, non-food & beverages industries in Dubai, Abu Dhabi, Sharjah, Fujairah, Ras Al Khaimah, Ajman, Umm Al Quwain, Al Ain – UAE, Saudi Arabia, Muscat, Oman, Kuwait, Bahrain and the many other Gulf countries.

LOOKING FOR THE PRICE

Please click on the link below and fill out the form