ROBPAC SISTEMI HELIX 3 EVO – stretch wrap
Automatic wrapping machine with rotating arm for average productivity.
The modularity of the units composing it results in the wide versatility of use, even with large pallets.
Al Thika Packaging is an exclusive distributor of Robopac Sistemi in the Middle East. Since 1994 Al Thika has been supplying best automatic horizontal & vertical Stretch Wrapping machines for food & non-food industries in Dubai, Abu Dhabi, Sharjah, Fujairah, Ras Al Khaimah, Ajman, Umm Al Quwain, Al Ain – UAE, Saudi Arabia, Bahrain, Oman and the many other Gulf countries.
PGSM CARRIAGE – EVO
Pre-stretch carriage with single motorisation with standard provided ratios 150% – 208% -245%, which can be replaced manually thanks to optional kits for ratios from 80% to 344%
PGSA EVO CARRIAGE
Carriage with double independent motorisation for continuously varying pre-stretch from control panel 150% to 400% and apply up to 12 containment force values on the pallet.
SCSP/2 EVO CARRIAGE
Carriage with double independent SSC motorisation for continuously varying pre-stretch from control panel 150% to 400% and apply up to 12 force containment values on the load.
EVO PINCERS CLAMP
Standard pincers clamp with hot wire film cutting
HOT PLATE SEALER
System to obtain perfect sealing of the stretch film
EVO SPRING CLAMP
Optional new generations device for clamping, cutting and film sealing
Clamp with wrapping film tail insertion
VERTICAL PRESSURE PLATEN
The device can be used with particularly unstable loads
Pallet lifting system located under the conveyor in the machine centre.
Device for covering the upper side of the pallet
Device for reducing the width of the wrapping film
VCA4 – CORNER APPLICATOR
Automatic corner applicator device to protect the load
|STANDARD TECHNICAL FEATURES|
|Pallet Dimensions min – max (*)||mm||400×600 – 1220×1220|
|Maximum pallet height||mm||2000|
|Output capacity (* *)||Pallet/h||75|
|Standard pre-stretch carriage||PGSM – single motorisation, fixed pre-stretch, optional kits for different pre-stretch ratios (manual replacement)|
|Optional pre-stretch carriage||PGSA – Double independent motorisation, variable pre-stretch
SCSP/2 – Double independent SSC motorisation, variable pre-stretch
|Pre-stretch ratio included||161% – 208% – 269%|
|( *) Possibility of wrapping the half and quarter pallet|
|( * *) In certain wrapping conditions and defined pallet sizes|
|STANDARD ELECTRICAL FEATURES|
|Power supply voltage||V||380 – 400 – 415 ± 5%|
|Power supply frequency||Hz||50 ± 1%|
|STANDARD PNEUMATIC FEATURES|
|Compressed air pressure||Bar||6 ± 1|
|Film reel height||mm||500 (Standard) – 750 (Optional)|
|Max reel diameter||mm||250|
|Reel cardboard height||mm||510 (Standard)|
|Workable film thickness (***)||μm||12 – 30|
|TOP Film thickness||μm||60 – 90|
|(***) According to film quality|