Safeline X33 X-ray for Bulk flow Inspection
Mettler Toledo X-ray for bulk food products
Outstanding Bulk Inspection
The X33 Series Bulk Variant x-ray system provides exceptional contamination detection in unpackaged products in a bulk flow format. Inspecting up to 5,000kg of product per hour.
Reduced Total Cost of Ownership
A 20W generator offers a reduction of operating power of up to 20%, achieving outstanding detection results.
Ensuring Food Safety
Contaminants are rejected into a lockable reject bin, minimising waste, ensuring food safety and providing due diligence.
Easy access to all machine areas with no hidden bug traps, ensuring maximum uptime. IP69 comes as standard for harsh wash-down environments.
X33 Bulk Series Specification Table
|Casing Material||304 stainless steel|
|Ingress Protection||Full IP69 high pressure wash-down protection|
|Conveyor Speed||Typical line speeds 20- 40 m/min|
|Infeed Options||Flexible infeed: Hopper or end-fed option|
|Throughput Rate||Typical throughput rates of up to 5,000 kg/hour|
|Maximum Product Layer||350mm (W) x 30mm (H), dependent on product|
|Screen Display||10.1” TFT (16:9 aspect ratio)|
|Operating Temperature||5 – 40°C|
|Pneumatic Supply||Minimum 6 Bar(g) clean air supply required|
|Belt Tracking||Automatic pneumatic tracking and tensioning|
|X-ray Detector||0.8mm diodes, 400mm width|
|X-ray Generator||20W, 84kV, 0.25mA Beryllium|
|X-ray Emissions||< 1uSv/hr|
|Reject Type||Two/Four lane scoops|
|System Conveyor||FDA and EU food use approved TPU conveyor belt|